WakeMAKERS Engine Divider Panel Savers

Rated 4.9 out of 5
Based on 35 reviews
Write a Review
WakeMAKERS Engine Divider Panel Savers
WakeMAKERS Engine Divider Panel Savers
WakeMAKERS Engine Divider Panel Savers
WakeMAKERS Engine Divider Panel Savers
Regular price
$89.99

Item: M10051

Designed to strengthen the engine divider panels on v-drive boats to prevent bowing when additional ballast has been added to the rear lockers. Sold as a pair.

One of the most popular WakeMAKERS products for several years now, our exclusive Engine Divider Panel Savers are a robust, easy to install solution to reinforce your engine divider panels. Add additional ballast to your rear lockers to achieve that great wake and don't worry about bowing of the engine divider panels due to the ballast bag bulging.

Each Engine Divider Panel Saver Kit now comes with a total of six bars, three for each of your two engine divider panels. Just order a quantity of 1 of this product, and you'll have everything you need for the whole boat.

The bar struts included in this kit are 19" long, making for a perfect fit on nearly any engine divider panel. Simply position the reinforcement bars on your panel, drill the required holes, and use the supplied allen key and hardware to securely fasten them in place. In just a few minutes you've prevented your divider panels from bending, bowing, or popping out of the track. No matter how much your ballast bag bulges in the rear locker, you can relax knowing that your engine divider panels are strong enough to withstand it.

Like all WakeMAKERS products, these are designed and built at our headquarters in Bend, Oregon. Built from thick sidewall 6063 Aluminum U channel and all hardware is stainless steel. After being precision cut, finished with radius edges, and drilled for a perfect fit, the bar struts are powder coated flat black for corrosion resistance and a factory appearance. Once installed they are practically invisible and look so good that most people will assume the boat came with them from the factory.

Our Engine Divider Panel Savers are now sold as a complete solution for both sides of the engine panels.

Estimated Install Time: 30 minutes

Required Tools: 3/8" drill bit

What's Included:

  • 1" wide x 19" long 6063 Aluminum Machined U Channel Struts
  • 5/16-18 x 1" 304 Stainless Steel
  • 3/16" Hex Head Allen Wrench

Expert Insight: Use Provided Tools

During installation we advise against using power drills to installs the bars as it causes the hardware to seize. Instead, hand tighten the hardware using the provided allen key.

Warranty
1 Year
Item #
M10051
Warning
average rating 4.9 out of 5
Based on 35 reviews
  • 5 Stars
    33 Reviews
  • 4 Stars
    2 Reviews
  • 3 Stars
    0 Reviews
  • 2 Stars
    0 Reviews
  • 1 Star
    0 Reviews
100% of reviewers would recommend this product to a friend
35 Reviews
Reviewed by Mike
Verified Buyer
I recommend this product
Rated 4 out of 5
Review posted

needed two kits

The instructions say one kit (6 peices) to support two divider panels. However, the 2007 SV211 has a split divider panel design. The soft aluminum easily bent under pressure from the wakemakers piggy back ballast. I have redone the installation using two kits (6 reenforcing bars on each side). I'm keeping my fingers crossed they do not bend this time. If so, I'll try to source a stronger material, like stainless steel. Nice idea but it needs to maintain it's shape to do it's job.

Loading...
Was this helpful?
Reviewed by Logan D.
Verified Buyer
I recommend this product
Rated 4 out of 5
Review posted

Short bolts

I would give 5 starts except that the 1" bolts were too short to install on my divider panels. Overall great product.

Loading...
Was this helpful?
Reviewed by Harold B.
Verified Buyer
I recommend this product
Rated 5 out of 5
Review posted

Excellent setup

Very nice instruction and fit and finish.

Loading...
Was this helpful?
Reviewed by Kenneth S.
Verified Buyer
I recommend this product
Rated 5 out of 5
Review posted

Simple

Put the panels on sawhorses, grab a few beers, put on some music, and drag out the process. Or you could do it fast in about 20 minutes.

Loading...
Was this helpful?
Reviewed by Adam M.
Verified Buyer
I recommend this product
Rated 5 out of 5
Review posted

Well thought out product

As other have mentioned - this is a really well thought out product. The only tool you need to install this kit is a drill. The kit comes with an allen key and the nuts lock in by itself in the U-shaped bars - a clever design! I could have made them myself, but at $79,99 it just doesn't make sense, if you add the costs of material, your time to put it together and get all the parts up. Bravo!

Loading...
Was this helpful?

WARNING

This product can expose you to chemicals including DINP (Diisononyl phthalate) and DIDP (Diisodecyl phthalate) which are known to the State of California to cause cancer. For more information go to https://www.p65warnings.ca.gov.

Best Price Promise

We want you to receive the best possible deal on your boating products. We match any authorized dealer's advertised price for the same in-stock item. What does that mean for you? If you find the same product in stock at another authorized retailer we'll gladly match their price delivered price. Don't forget that on top of our free fast shipping (on any order over $99 shipped to the Continental US) we also offer our exclusive lifetime technical support.

  • WakeMAKERS Best Price Promise is only valid on products sold by factory authorized internet dealers.
  • WakeMAKERS Best Price Promise is not available with any coupons or individual discounts.
  • WakeMAKERS Best Price Promise is based on the delivered price for the item and will factor in shipping and tax charges.
  • WakeMAKERS Best Price Promise is only available on an exact, in stock product with a displayed internet price (not price implied after promotions and coupons)
  • WakeMAKERS Best Price Promise is not available to be applied retroactively, so please contact us us BEFORE placing your order.

If you have any questions about our price match policy, or if you would like us to match a price for you, simply contact us.

Note We have the right to refuse price matching at any time for any reason. In order to qualify for price matching, the item must be identical make, model, year, and part number, and must be in stock. Price matching excludes sale items and previously purchased products.

365 Day Returns

365 Day Returns Your satisfaction is our biggest priority, which is why we gladly accept returns on any new product for up to 365 days from the date your order ships. Refunds will be issued to the original payment method. Returns on orders older than 30 days can be processed but will be completed for store credit in total of the returned item and not a return on the original payment method. Returns on orders older than 365 days cannot be processed and are unable to be accepted.

Option 1: To initiate a return, log in to your account and click on the "My Orders" tab on the left side of the page, navigate to the order or product you'd like to return and follow the instructions to return the item/s.

Option 2: Contact us via phone or email at support@wakemakers.com and we will provide you with a Return Merchandise Authorization number (RMA). Fill out the back of the packing slip that was included with your order, noting the RMA number where specified and include the packing slip with your shipment back to us. Returns without an RMA number and packing slip cannot be processed and will not be accepted. If you need a duplicate copy of the packing slip, contact us.

Returns will be processed within 3 business days after receiving them. Please note that it can take up to 10 business days (2 weeks) for the refunds to be posted to your original payment method.

*Returns for propellers, propeller pullers, custom ballast bags, blemished ballast bags, lengths of hose, lengths of wire, eFoil Batteries and any other custom modified product are not accepted. All sales on these products are final.

Expert Advice

Our product experts bring over 40+ years of real-world experience and knowledge of the boating industry. They really know the gear, because they spend their free time out on the water with friends and family testing the products out.

Product Expert Phone Hours 9am - 5pm (PST) Monday - Friday

Product Expert Email We respond to most emails within 24-48 hours.

Looking for specific installation guides or instructional videos? Check out our Resource Section for detailed information.

WakeMAKERS Online Shopping Tools Our Finder tools are designed to help you pick the perfect product. We've simplified the complex process of finding the right ballast or prop for you boating style and made it easy by doing the research for you.

Our goal is simple; provide the best product, at the best price, with the best customer support.

Free Shipping On Orders Over $99

The last thing you want to do is pay to have your order shipped when shopping online, which is why we include free shipping on all orders over $99*.

*Free shipping offer applies to orders over $99 shipped within the Continental United States and cannot be combined with other discounts or promotions (including coupon codes).